JAI GO-5100MP-USB User Manual page 25

2. FourPolarizeElement mode
The data is output arranged as a screen divided into four (pixels of the polarizers angled
at 45º at the top right, pixels of the polarizers angled at 90º at the top left, pixels of the
polarizers angled at 0º at the bottom right, and pixels of the polarizers angled at 135º at
the bottom left).
3. FourFunctions mode
This mode allows you to set each quadrant of the screen to one of five available
functions. The five selectable functions are:
PolarizeAngle (polarization angle), PolarizeRatio (polarization ratio),
DiffusedLight (diffused light), PolarizedLight (polarized light),
and AverageLight (average brightness)
The follow example shows the settings that would be used to configure the output
into four functions arranged as shown in the screen diagram below.
Setting item
PolarizeImageSelector:
Panel1selector:
Panel2selector:
Panel3selector:
Panel4selector:
1232 pixels
PolarizeAngle
PolarizeRatio
DiffusedLight
PolarizedLight
— 25 —
Setting value
FourFunctions
PolarizeAngle
PolarizeRatio
DiffusedLight
AverageLight
GO-5100MP-USB