Step 7:Saving The Settings - JAI GO-5100MP-USB User Manual

Step 7: Saving the Settings
The setting values configured in the player (eBUS SDK for JAI) will be deleted when the
camera is turned off. By saving current setting values to user memory, you can load and
recall them whenever necessary. You can save up to three sets of user settings in the
camera. (User Set1 to 3)
Note
Changes to settings are not saved to the computer (eBUS SDK for JAI).
■ To save user settings
1
Stop image acquisition.
2
Expand [UserSetControl], and select the save destination ([UserSet1] to
[UserSet3]) in [UserSetSelector].
Note
The factory default setting values are stored in [Default] and cannot be overwritten.
Caution
Settings can only be saved when image acquisition on the camera is stopped.
3
Select [UserSetSave], and click [Execute 'UserSetSave' Command].
The current setting values are saved as user settings.
Memory(Flash)
一時メモリ
DefaultSet
UserSet1
UserSet2
UserSet3
— 20 —
Memory(RAM)
Working Set
GO-5100MP-USB
eBUS SDK for
JAI (Player)