JAI GO-5100MP-USB User Manual page 26

The same function can be output in multiple quadrants.
*)
Polarization angle:
The polarization angle producing the greatest luminance for a given pixel block.
Intensity values assigned to pixels represent angles from 0 to 180˚.
8-bit output:
10-bit output:
Polarization ratio:
The proportion of polarized light (at the angle described above) contained within
the total light falling on a pixel block. Intensity values represent proportions of
polarized light from 0 to 100%.
8-bit output:
10-bit output:
Diffused light:
The intensity of light falling on a pixel block when some or all of the polarized
light is excluded. The ReflectionAdjust control determines how much of the
polarized component is removed. The higher the ReflectionAdjust setting, the
more polarized light is removed. Set to maximum to display only the diffused
component.
Polarized light:
The intensity of the polarized light that is falling on a pixel block after the diffused
light has been excluded.
Average light:
The brightness of a pixel block when the polarized component and the diffused
component are averaged.
Two additional output modes are available to users. These are not selectable in the
FourFunctions mode. Instead, they produce a single image that combines
information from the functions above with the main image being captured.
4. ColorOnPicture mode
This mode provides a pseudo-color overlay representing polarization angle and
polarization ratio information displayed over an image built using average light
information. The PixelFormat is automatically changed in this mode as follows:
When PixelFormat is Mono8, the image is output as BayerRG8
When PixelFormat is Mono10, the image is output as BayerRG10
When PixelFormat is Mono10Packed, the image is output as BayerRG10Packed
5. ColorOnGray mode
This mode provides a pseudo-color overlay representing polarization angle and
polarization ratio information displayed over a gray image. The PixelFormat is
automatically changed in this mode as follows:
When PixelFormat is Mono8, the image is output as BayerRG8
When PixelFormat is Mono10, the image is output as BayerRG10
When PixelFormat is Mono10Packed, the image is output as BayerRG10Packed
00000000 to
0000000000 to 1110000100
00000000 to
0000000000 to 1111111111
— 26 —
GO-5100MP-USB
10110100
11111111