JAI GO-5100MP-USB User Manual page 45

■ Internal camera blocks
■ To use the counter function
Configure the settings as follows.
Three counters can be configured (Counter 0 to 2).
Item
Counter 0 to 2
Counter 0 to 2 Event Source
Counter 0 to 2 Event Activation
* The three counter event signals are always counted up internally on the camera.
Setting value /
selectable range
Counter 0 to 2
Off,
Frame Trigger, Frame Start,
Exposure Start, Exposure
Transfer End
Rising Edge or Falling Edge
— 45 —
GO-5100MP-USB
Description
Select the counter.
Select the counter event signal
for which to read the count
value.
Specify the timing at which to
count.