Step 3: Add The Xbee Modules To Xctu - Digi XBee Zigbee Mesh Kit User Manual

Get started with XBee Zigbee
3. Make sure you are in Configuration working mode.

Step 3: Add the XBee modules to XCTU

Use XCTU to find your XBee modules and add them to the tool.
1. Click Discover radio modules from the toolbar.
2. In the Discover radio modules dialog, select the serial port(s) in which you want to look for
radio modules. If you do not know the serial ports where your modules are attached, select all
ports. Click Next.
3. In the Set port parameters window, maintain the default values and click Finish.
4. As XCTU locates radio modules, they appear in the Discovering radio modules... dialog box.
Once the discovery process has finished, click Add selected devices.
5. At this point, assuming you have three modules connected to your computer, you should see
something like this in the Radio Modules section on the left:
Note The function, port number and the MAC address displayed for your modules need not match
those shown in the picture.
XBee® Zigbee® Mesh Kit
Example: basic communication
24