Change The Firmware Protocol - Digi XBee Zigbee Mesh Kit User Manual

This guide provides step by step examples, and some use the Java programming language. These
examples are designed to be easy for anyone to use, and those with some programming background
can extend them.

Change the firmware protocol

Although the kit comes pre-loaded with Zigbee firmware, you can change the RF protocol used by the
XBee3. To change protocols, use the Update firmware feature in XCTU and select the firmware. See
the XCTU User Guide.
The XBee3 hardware can run any of the following protocols:
DigiMesh
n
Zigbee
n
802.15.4
n
For information on each of these firmwares and instructions for how to get started, see the user
guide for each protocol:
DigiMesh
n
Zigbee
n
802.15.4
n
XBee® Zigbee® Mesh Kit
12