Change Settings; Save Settings; Real Projects With Xbee Modules - Digi XBee Zigbee Mesh Kit User Manual

Additional resources

Change settings

When you change the value of a setting, the background color of the control changes depending on the
status of its value. The color legend appears next to the firmware information panel and reads the
following:
Gray: The value of the setting is written in the radio module and matches the default value.
n
Blue: The value of the setting is written in the radio module but is different than the default
n
value.
Green: The value of the setting has changed but it has not been written in the radio module
n
yet.
Red: The value of the setting is not valid.
n
Whenever you change the value of a setting, you must save the changes in the module.

Save settings

If you have changed the value of any firmware setting, click the Write module settings button to
write the new values to the radio module.
As with the reading process, the previous button writes all the settings that have been modified. If you
want to write only a specific setting, click the Write button that appears on the right side of the
setting control.

Real projects with XBee modules

Explore the links below for real-world projects made with XBee technology.
XBee® Zigbee® Mesh Kit
Real projects with XBee modules
206