HP ProCurve 5300xl Series Management Manual page 99

Figure 3-6. Example of "Show GVRP" Listing with GVRP Disabled
Figure 3-7. Example of Show GVRP Listing with GVRP Enabled
Enabling and Disabling GVRP on the Switch. This command enables
GVRP on the switch.
Syntax:
gvrp
This example enables GVRP:
HPswitch(config)# gvrp
This example disables GVRP operation on the switch:
HPswitch(config)# no gvrp
Enabling and Disabling GVRP On Individual Ports. When GVRP is
enabled on the switch, use the unknown-vlans command to change the
Unknown VLAN field for one or more ports. You can use this command at
either the Manager level or the interface context level for the desired port(s).
Configuring GVRP On a Switch
This example includes
non-default settings for
the Unknown VLAN field
for some ports.
GVRP
3-15