Switch Meshing
Configuring Switch Meshing
Table 7-2.
Operating Details for Figure 7-12
Port
Meshing? Connection
A1
Yes
Connected to a port that may not be configured for meshing
A2
Yes
Connected to a switch port on a device that is not configured for meshing (another switch, or a
hub). In this case, the Topology Error message indicates that the switch detects a meshed port
on another, non-adjacent device that is also connected to the non-meshed switch or hub.
However, meshing will not operate properly through this connection.
B1
Yes
Not connected to another device.
C1
Yes
Connected to a meshed port on the same adjacent switch as D1 with meshing operating properly.
D1
Yes
Connected to a meshed port on the same adjacent switch as C1 with meshing operating properly.
7-16
Figure 7-13 lists the show mesh display for the topology and meshing config
uration in figure 7-12:
Figure 7-13. Example of the Show Mesh Listing for the Topology in Figure 7-12