HP ProCurve 5300xl Series Management Manual page 41

The legacy (non-802.1Q
compliant) switch requires a
separate link for each VLAN.
Red
VLAN
Non-802.1Q
Switch
Blue
VLAN
Figure 2-5. Example of Tagged and Untagged VLAN Technology in the Same
Network
For more information on VLANs, refer to:
■ "Overview of Using VLANs" (page 2-43)
"Menu: Configuring VLAN Parameters (page 2-21)
■
■ "CLI: Configuring VLAN Parameters" (page 2-21)
■ "Web: Viewing and Configuring VLAN Parameters" (page 2-37)
"VLAN Tagging Information" (page 2-38)
■
"Effect of VLANs on Other Switch Features" (page 2-51)
■
■ "VLAN Restrictions" (page 2-53)
Per-Port Static VLAN Configuration Options
The following figure and table show the options you can use to assign
individual ports to a static VLAN. Note that GVRP, if configured, affects these
options and VLAN behavior on the switch. The display below shows the per-
port VLAN configuration options. Table 2-4 briefly describes these options.
Red Server
Blue Server
Red VLAN
ProCurve
Switch
Blue VLAN
Blue
VLAN
Red
VLAN
Static Virtual LANs (VLANs)
Static VLAN Operation
VLAN tagging
enables the Link to
carry Red VLAN and
Blue VLAN Traffic
Red
ProCurve
VLAN
Switch
Blue
VLAN
2-11