HP ProCurve 5300xl Series Management Manual page 259

The asterisk indicates
that you must reboot the
switch to cause the
Mesh configuration
change to take effect.
Figure 7-10. After Saving a Mesh Configuration Change, Reboot the Switch
8.
9. To activate the mesh assignment(s) from the Main menu, reboot the
(The switch cannot dynamically reconfigure ports to enable or disable mesh­
ing, so it is always necessary to reboot the switch after adding or deleting a
port in the switch mesh.)
Press [0] to return to the Main menu.
switch by pressing the following keys:
a. [6] (for Reboot Switch)
b. Space bar (to select Yes).
13 (to start the reboot process).
c.
Switch Meshing
Configuring Switch Meshing
7-13