HP ProCurve 5300xl Series Management Manual page 187

Figure 6-5. Example of the RSTP Configuration Screen
7. Press the key or use the arrow keys to go to the next parameter you
[Tab]
want to change, then type in the new value or press the Space bar to select
a value. (To get help on this screen, press
line, then press
[H]
8. Repeat step 6 for each additional parameter you want to change.
Please see "Optimizing the RSTP Configuration" on page 6-11 for recom­
mendations on configuring RSTP to make it operate the most efficiently.
9. When you are finished editing parameters, press
Actions –> line and press
settings and return to the Main Menu.
10. If you have changed the Protocol Version, in step 1, reboot the switch now
by selecting
6. Reboot Switch
Configuring Rapid Reconfiguration Spanning Tree (RSTP)
, for Help, to display the online help.)
[S] to save the currently displayed spanning tree
Spanning-Tree Operation
to select the Actions –>
[Enter]
[Enter] to return to the
6-19