HP ProCurve 5300xl Series Management Manual page 540

IP Routing Features
Configuring OSPF
11-54
Syntax: show ip ospf general
The following fields are shown in the OSPF general status display:
Table 11-6. CLI Display of OSPF General Information
This Field...
OSPF protocol
Router ID
RFC 1583 compatibility
Default import metric
Default import metric type
Area Border
AS Border
External LSA Count
External LSA Checksum Sum the sum of the checksums of all external LSAs currently in the
Originate New LSA Count
Receive New LSA Count
Displays...
indicates whether OSPF is currently enabled.
the Router ID that this routing switch is currently using to
identify itself
indicates whether the routing switch is currently using RFC
1583 (compatible) or RFC 2328 (non-compatible rules for
calculating external routes.
indicates the default metric that will be used for any routes
redistributed into OSPF by this routing switch
indicates the metric type (type 1 or type 2) that will be used for
any routes redistributed into OSPF by this routing switch
indicates whether this routing switch is currently acting as an
area border router
indicates whether this routing switch is currently acting as an
autonomous system border router (redistributing routes)
indicates the total number of external LSAs currently in the
routing switch's link state database
routing switch's link state database (quick check for whether
database is in sync with other routers in the routing domain)
count of the number of times this switch has originated a new
LSA
count of the number of times this switch has received a new
LSA