Displaying The Content Of A Specific Acl - HP ProCurve 5300xl Series Management Manual

Note
Access Control Lists (ACLs) for the Series 3400cl and Series 6400cl Switches
For example, if you assigned a standard ACL with an ACL-ID of "1" to filter
inbound traffic on port 10, you could quickly verify this assignment as follows:
Figure 10-23. Example of Listing the ACL Assignment for an Interface

Displaying the Content of a Specific ACL

This command displays a specific ACL configured in the running config file in
an easy-to-read tabular format.
This information also appears in the show running display. If you executed write
memory after configuring an ACL, it appears in the show config display.
Syntax: show access-list < acl-name-string >
Display detailed information on the content of a specific ACL configured in the
running-config file.
Displaying ACL Data
Indicates that a standard ACL with
the ID of "2" is assigned to filter
inbound traffic on port 7.
Indicates that a standard ACL with
an ID of "1" is assigned to filter
inbound traffic on port 3, and that
another standard ACL with an ID of
"2" is assigned to filter inbound
traffic on port 7 and Trk1 (trunk 1).
10-61