Heating Timer Operation Function - Gira 5142 00 Product Documentation

Software "Push button sensor 3 plus"
Functional description

4.2.4.1.11 Heating timer operation function

Heating timer operation facilitates demand-driven activation or deactivation of the heating timer
integrated in the device. The heating timer implements the automatic switchover of the controller
operating mode depending on the time of day and the day of the week. For this purpose, the
device provides up to 28 separate switching times that can be preconfigured individually in the
ETS (see page 163-164), and can be modified subsequently via the settings menu while the
push button sensor is in operation (see page 26).
Pressing a button configured as "Heating timer operation" switches over the state of the heating
timer (activated <-> deactivated). The status LED of the button can indicate the state of the
push button function.
It should be noted that the heating timer operation is only effective if the function has been
enabled globally on the "Room temperature control -> Heating timer" parameter page. Only then
is an additional parameter for the push button function visible.
i The "Heating timer operation" function cannot be configured for a rocker function.
Order No. 5142 00
Page 98 of 281
Order No. 5145 00