Status Led - Gira 5142 00 Product Documentation

4.2.4.1.13 Status LED

Basic function
Each control surface on the push button sensor has two status LEDs. The parameters "Function
of the left status LED" and "Function of the right status LED" on the parameter pages "Button x -
Status LED" or "Rocker x - Status LED" define the basic functions of these status indicators.
Depending on the configuration of the rockers or buttons, the possible LED functions available
differ slightly. The display parameters "Possible LED functions" on the parameter pages of the
status LEDs show the specific LED functions that can be configured. If LED functions other than
the possible ones are configured, the affected status LEDs will not have any function during
subsequent operation of the push button sensor (always OFF).
i The parameter pages of the status LEDs are subordinated to the rocker switches or
buttons, and each of them contains the status LEDs assigned to the rocker switches or
buttons (for buttons only one LED each / for rocker switches two LEDs each).
The following LED functions are available for selection in the configuration...
- "always OFF"
This setting can be selected for every rocker switch/push button function.
- "always ON"
This setting can be selected for every rocker switch/push button function.
- "button-press display"
This setting cannot be selected for the rocker switch/push button functions "No function"
and "2-channel operation".
- "telegram acknowledgment"
This setting can only be selected for the rocker switch/push button function "2-channel
operation".
- "status display (switching object)"
This setting can only be selected for the rocker switch/push button functions "Switching"
and "Dimming".
- "inverted status display (switching object)"
This setting can only be selected for the rocker switch/push button functions "Switching"
and "Dimming".
- "activation via separate LED object"
This setting can be selected for every rocker switch/push button function.
- "operating mode display (KNX controller)"
This setting can be selected for every rocker switch/push button function.
- "Controller status display"
This setting can be selected for every rocker switch/push button function.
- "Setpoint value shift display"
This setting can only be selected for the push button functions "Controller extension -
setpoint shifting" or "Controller operation - setpoint shifting".
- "Button function active display"
This setting can only be selected for the push button functions "Controller extension -
presence button", "Controller operation - presence button", "Controller operation - operating
mode switchover" or "Heating timer operation".
- "Button function inactive display"
This setting can only be selected for the push button functions "Controller extension -
presence button", "Controller operation - presence button", "Controller operation - operating
mode switchover" or "Heating timer operation".
- "comparator without sign (1 byte)"
This setting can be selected for every rocker switch/push button function.
- "comparator with sign (1 byte)"
This setting can be selected for every rocker switch/push button function.
Order No. 5142 00
Order No. 5145 00
Software "Push button sensor 3 plus"
Functional description
Page 100 of 281