Object Table, Controller Function Section - Gira 5142 00 Product Documentation

4.2.3.2 Object table, controller function section

Objects for room temperature measurement
Function: Room temperature measurement
Object Function
64
Actual temperature
h
Description 2-byte object for the display of the actual temperature (room temperature),
which is determined by the controller or controller extension. Possible value
range: -99.9 °C to +99.9 °C / Measurement range of internal temperature
sensor: 0 °C to +40 °C.
The temperature value is always output in the format "°C".
Function: Room temperature measurement
Object Function
65
Received temperature
h
Description 2-byte object for coupling an external KNX/EIB room temperature sensor or a
controller extension. Thus cascading of multiple temperature sensors for room
temperature measurement. Possible range of values: -99.9 °C to +99.9 °C.
The temperature value must always be specified in the format "°C".
Function: Room temperature measurement
Object Function
75
External sensor
h
Description 2-byte object for transmitting the temperature value measured via the wired
remote sensor to the bus. Possible value range: -99.9 °C to +99.9 °C /
Measurement range of sensor: 0 °C to +50 °C.
The temperature value is always output in the format "°C".
Object for heating timer
Function: Heating timer
Object Function
77
Disabling heating timer
h
Description 1-bit object for disabling the integrated heating timer. The telegram polarity
can be configured.
1: For reading, the R-flag must be set. The last value written to the object via the bus will be
read.
Order No. 5142 00
Order No. 5145 00
Software "Push button sensor 3 plus"
Name Type
C.Output 2 byte
Name Type
C.Input 2 byte
Name Type
C.Output 2 byte
Name Type
C.Input 1-bit
Object table
DPT Flag
9.001 C, -, T, R
DPT Flag
9.001 C, W, -, (R)
1
DPT Flag
9.001 C, -, T, R
DPT Flag
1.001 C, W, -, (R)
1
Page 52 of 281