Display; Display Structure And Information Displayed - Gira 5142 00 Product Documentation

Software "Push button sensor 3 plus"
Functional description

4.2.4.5 Display

4.2.4.5.1 Display structure and information displayed

Display structure
The device's graphics display has 103 x 40 pixels and is equipped with switchable LED
backlighting. The display is subdivided into various display areas, depending on the
configuration in the ETS, the operating state and the specific device functions that are activated.
A general distinction can be made between 1-area and 2-area display. With two display areas
(Figure 50), the upper area of the normal display (15), also called the status line, shows
symbols that indicate various operating modes of the room temperature controller or the
controller extension. Moreover it is optionally possible to display in the status line the time (left
justified) and additional temperature values of the controller extension (right-justified).
The lower area of the display (16), also called the menu area, can be used to visualise various
temperature values in a single-line or two-line format. In addition it is possible to display values
that have been received by KNX/EIB via separate communication objects in various data and
depiction formats. Furthermore, display of the time and date from an external KNX/EIB system
clock in the graphics display can optionally be configured.
When only one display area is used (Figure 51), the normal display shows temperature values
and indicates the operating mode of the room temperature controller. This type of display is the
clearest and simplest display function, with only a single large menu area (17).
Figure 50: Example of a basic display with two display areas
(Time, setpoint temperature, room temperature, fan level display)
Figure 51: Example of a basic display with one display area
(Room temperature, operating mode display)
(15) Status line
(16) Menu area for 2-area display
(17) Large menu area for 1-area display
The form of the display areas and thus the selection of information shown on the display
depends largely on the parameter configuration in the ETS (see "Display information" below).
Moreover, the display can be used to show and change various settings of the device (see
page 20).
Order No. 5142 00
Page 181 of 281
Order No. 5145 00