Advertisement
KNX
Push button sensor 3
The function of this device depends upon the software. Detailed information on loadable
software and attainable functionality as well as the software itself can be obtained from the
manufacturer´s product database. Planning, installation and commissioning of the device are
carried out with the aid of KNX-certified software. The latest versions of product database and
the technical descriptions are available on our website.
Intended use
-
Operation of loads, e.g. light on/off, dimming, blinds up/down, brightness values,
temperatures, calling up and saving light scenes, etc.
-
Installation in appliance box according to DIN 49073
Product characteristics
-
The pushbutton functions switching, dimming, controlling blinds, valuators, calling up
moods, etc.
-
Two status LEDs per operating rocker, which can be switched together or separately
according to the equipment and programming
-
Illuminable inscription panel
-
Push button sensor comfort: Three colour status LED (red, green, blue). Five brightness
levels for status LEDs and illuminable inscription panel
4 Operation
Operating a function or load
Push button sensor basic: Each operating rocker is divided into two halves, with a function
assigned to each of them. Operation depends on the specific function.
Comfort push button sensor: Depending on the programming, a control rocker can have up to
three functions assigned to it – left, right, entire surface. Operation depends on the specific
function.
o
Switch: Short press on button.
o
Dim: Long press on the button. The dimming process ends when the button is released.
o
Move Venetian blind: Long press on button.
o
Stop or adjust Venetian blind: Short press on button.
o
Call up light scene: Short press on button.
o
Save light scene: Long press on button.
o
Set value, e.g. brightness or temperature setpoint: Short press on button.
5 Information for electrically skilled persons
5.1 Fitting and electrical connection
DANGER!
Electrical shock on contact with live parts in the installation environment.
Electrical shocks can be fatal.
Before working on the device, disconnect the power supply and cover up live
parts in the working environment.
32574912
10410684
24.02.2016
2/5
Advertisement
