2.2 Device components
Figure 1: Device components of push button sensor 3 plus
(1) Display control surface
(Graphics display and 2 x buttons left and right)
(2) Control surfaces
(1 x rocker switch or 2 x button left and right / colours depend on design)
(3) Status LED
(2 x per control surface left and right / colour configurable)
(4) Labelling field with backillumination
(5) Central web (colours depend on design)
Dimensions (2-gang):
Width (W): 55 mm / Height (H): 55 mm / Depth (D): 10 mm
Dimensions (5-gang):
Width (W): 55 mm / Height (H): 126 mm / Depth (D): 10 mm
i Specifications without flush-mounted bus coupling unit, without fastening brackets and
without design frame.
i Neutral inscription panels are included with the devices as part of the scope of supply. If
necessary, individual labels can be created using optionally available labelling sheets (see
Accessories) and labelling software, or on the Internet at marking.gira.com.
Order No. 5142 00
Order No. 5145 00
Installation, electrical connection and operation
Page 9 of 281