Parameters On The Push Button Sensor Function Section - Gira 5142 00 Product Documentation

4.2.5.2 Parameters on the push button sensor function section

Description
h Push button sensor
Operation concept of
buttons 1 and 2
(The same parameters
are available for the
other operating areas /
button pairs.)
Button evaluation
(The same parameters
are available for the
other operating areas /
button pairs.)
h Push button sensor -> Rocker 1 (Buttons 1/2)
(Only if "Function of buttons 1 and 2 = as one rocker (rocker 1)"!)
Text for push button
assistance function
Text for push button
assistance for full-
surface operation
Order No. 5142 00
Order No. 5145 00
Values
Rocker function (rocker
1)
push button function
Single-area operation (only
as button 1)
Double-area operation (as
buttons 1 + 2)
Rocker switch 1 push
button assistance
function, free text with up
to 30 characters
Push button assistance
W1 full, free text with up to
30 characters
Software "Push button sensor 3 plus"
Comment
For each operating area, the user can
specify independently whether it is to be
used as a rocker with a common basic
function or as two different buttons with
completely independent functions.
Depending on this setting, the ETS
displays different communication objects
and parameter pages.
If the operation concept of an operating
area is configured as "push button
function", this parameter can be used to
specify whether single-surface or
double-area operation should be
implemented.
In "Single-area operation (only as button
1)", the entire control surface is
evaluated only as a single "large"
button. The surface can be depressed at
any desired point in order to execute the
underlying push button function. In this
setting, the button with the even button
number of the button pair (e.g. button 2)
is inactive and physically not present.
In "Double-area operation (as buttons 1
+ 2)" the control surface is divided into
two mutually independent buttons.
The push button assistance text is
parameterised here. The maximum
length of the push button assistance text
is 30 characters. Each time a button is
pressed, the ETS plug-in checks the
pixel character spacing of the letter that
has been entered, and if necessary
limits the text being entered to the length
that can be displayed. If no text is input,
the push button assistance for the
button or rocker switch in question is
inactive. This parameter is only visible if
the "Push button assistance function"
parameter on the "Display" parameter
page is set to "Activated".
The push button assistance text for full-
surface operation is parameterised here.
The maximum length of the push button
assistance texts is 30 characters. Each
time a button is pressed, the ETS plug-
in checks the pixel character spacing of
the letter that has been entered, and if
Parameters
Page 202 of 281