Software "Push button sensor 3 plus"
Functional description
4.2.4.6 Delivery state
As long as the push button sensor has not yet been programmed with application data by
means of the ETS, the labelling field illumination and the backlighting of the display flash at a
slow rate (approx. 0.75 Hz). When any of the buttons or rockers is pressed, the appropriate
status LED lights up briefly for the duration of the button actuation (button-press display). Each
time a button is pressed the colour of the status LED changes starting with red, then to green
and blue. This condition persists until the application is programmed into the device.
No telegram is transmitted to the bus in the event of a button-press.
The text "GIRA TS3plus" is shown on the display. In addition, the room temperature determined
by the internal sensor is displayed at the top right.
Order No. 5142 00
Page 198 of 281
Order No. 5145 00