Symbols - Gira 5142 00 Product Documentation

4.2.4.5.2 Symbols

When 2-area display is configured, the push button sensor shows in the status line information
in the form of small symbols regarding the room temperature controller or the controller
extension, the status of the push button sensor disable function, or the state of the heating
timer. The meanings of these symbols is explained in Table 12.
Display- Meaning
ed
symbols
0 "Comfort" operating mode active.
1 "Standby" operating mode active.
2 "Night" operating mode active.
¾|4 "Frost/heat protection" operating mode active.
y A "comfort extension" is active. **
w The controller is in dew point operation and is disabled. *
z Display of an active basic setpoint shift for relative setpoint presetting.
x Controller operation disabled. *
q Pushbutton sensor disabled.
4 Heating mode active Heating energy is demanded (command value > 0).
¾ Cooling mode active. Cooling energy is demanded (command value > 0).
Ø The heating timer is active. *
a Display of the fan level and the fan heating/cooling mode "Auto" or "Manu". This
symbol is displayed right-justified only in the menu area, depending on the
configuration.
Table 12: Meaning of the symbols in the status line of the 2-area depiction.
*: Not for controller extensions.
**: Not for controller extensions if the controller status is parameterised to "KNX compliant".
Order No. 5142 00
Order No. 5145 00
Software "Push button sensor 3 plus"
Functional description
Page 188 of 281