Product Definition; Product Catalogue; Function - Gira 5142 00 Product Documentation

1 Product definition

1.1 Product catalogue

Product name: Push button sensor 3 Plus 2-gang / Push button sensor 3 Plus 5-gang (2+3)
Use: Sensor
Design: UP (concealed)
Order No. 5142 00 / 5145 00

1.2 Function

The push button sensor 3 plus combines the functions of a KNX/EIB single-room temperature
controller, a push button sensor and a display unit in just one bus subscriber. The combination
of these functions makes it possible, for example, to control the light, the blinds, and the room
temperature centrally from the entry area of a room. The room temperature controller and push
button sensor functions are each independent function sections of the device with their own
parameter blocks in the ETS.
Depending on the device variant, the device has up to 5 control surfaces that can be used to
operate the integrated room temperature controller and the push button sensor. The functions
can be configured in the ETS. In addition the push button sensor 3 plus has 2 display buttons,
which can be used to check the setpoint temperature of the room temperature controller and to
configure additional device settings.
Push button functionality:
When a rocker or button is pressed, the device transmits telegrams to the KNX/EIB, depending
on the ETS parameter settings. These can be, for instance, telegrams for switching or push
button control, for dimming or for controlling blinds. It is also possible to program value
transmitter functions, such as dimming value transmitters, light scene extensions, temperature
value transmitters or brightness value transmitters.
In connection with a room temperature controller equipped with a 1-byte object for switchover of
operating modes, the device can be used as a full-featured controller extension. The device can
also be used for presence detection or for setpoint shifting purposes and to indicate different
controller states. As a supplement to the controller extension the push button sensor has an
integrated temperature sensor that makes it possible to measure and forward the local room
temperature.
The operation concept of an operating area can be configured in the ETS either as a rocker
function or alternatively as a push button function. With the rocker function, one operating area
is divided into two actuation pressure points (left / right) with the same basic function. With the
push button function a control surface is either divided into 2 adjacent, functionally-separate
actuation pressure points (2 buttons). Alternatively a control surface can be evaluated as single-
area operation (only a single large button). If a control surface is used as a single rocker
function, then it is also possible to trigger special functions using full-surface operation.
The push button sensor 3 plus has two status LEDs per operating area. These status LEDs can
either be switched on or off permanently, or can function as a status indicator for a button or
rocker. As an alternative, the LEDs can also be activated via separate communication objects.
The LEDs can either indicate the switching status of an object statically or by flashing, signal
operating states of room temperature controllers, or indicate results of logical value comparison
operations.
The colour of the status LEDs (red, green, blue) can be configured in the ETS either globally or
separately, as required. Optionally a superposed function can be activated via the bus, in which
the colour and display information of individual status LEDs can be changed according to
priority.
Room temperature controller functionality:
The device can be used for single-room temperature control. Depending on the operating mode,
the current temperature set value and on the room temperature, a variable for heating or cooling
Order No. 5142 00
Order No. 5145 00
Product definition
Page 4 of 281