Parameters For The Display - Gira 5142 00 Product Documentation

4.2.5.5 Parameters for the display

Description
h Display
Language
Display format of the
temperature values
Function of the LCD
illumination
Control via object value
Order No. 5142 00
Order No. 5145 00
Values
German
English
Dutch
Norwegian
Russian
Polish
Downloaded language
°C
°F
always OFF
always ON
Control via object
automatic switch-off
1 = static ON /
0 = static OFF
1 = static OFF /
0 = static ON
1 = flashing /
0 = static OFF
1 = static OFF /
Software "Push button sensor 3 plus"
Comment
This parameter defines the language
used to depict the texts specified by the
manufacturer in the display.
If the setting "Downloaded language" is
selected, a language file has to be
programmed into the device using the
ETS plug-in To do this, press the
"Service Download" button and then
select a language file and program it in.
If no language is downloaded, the
display shows the notice "font error" for
a certain time. The push button sensor
is then functional and works with English
display texts after the error display.
The temperatures can be indicated in
the display of the device in °C or
alternatively in °F. This display format
can be configured in the ETS in
common for all temperature values
using this parameter.
This parameter only affects the display.
The temperature values in the
communication objects are not affected
by this. Here the value transfer always
takes place in °C!
This parameter defines the function of
the LCD illumination. The LCD
illumination can be permanently on or off
or alternatively be switched via a
communication object. Optionally the
LCD illumination can be switched on by
pressing any desired button and
switched off again automatically after a
delay time has elapsed. Here the
parameter "Time for automatic switch-
off" defines the delay until switch-off
after the last button-press. Each button-
press re-initiates the delay time.
If the "Function of the LCD illumination"
is set to "Control via object", then the
telegram polarity of the 1-bit object
"B.LCD illumination" can be specified at
this point.
The illumination can be switched on or
off statically. In addition, the received
switching telegram can be evaluated in
such a way that the illumination flashes.
Parameters
Page 271 of 281