Controller Operation Function - Gira 5142 00 Product Documentation

4.2.4.1.10 Controller operation function

The "Controller operation" push button function can be used to control the internal room
temperature controller. The room temperature controller of the push button sensor 3 plus offers
different ways of influencing the room temperature control...
- Operating mode switch:
Switching over between different modes of operation (e.g. "Comfort", "Night" ...) with
different setpoint temperatures assigned to each mode by the thermostat.
- Presence status:
Signalling the presence of a person in a room. The signalling may also be combined with a
configured switchover in the mode of operation. Pressing a button switches over the
presence status. This push button function may only be used if the presence detection is
configured to "Presence button" on the "Controller functionality" parameter page.
- Setpoint shift:
Readjustment of the setpoint temperature in steps which are referred in each case to the
configured setpoint temperature of the current mode of operation. A setpoint shift is only
possible if the controller is configured in the ETS to relative temperature setpoints
(derivation from basic setpoint) (see page 136)! With absolute setpoint temperature
presetting the push button sensor does not execute the "Setpoint shift" push button
function.
i It should be noted that controller operation is only possible with a button configuration. The
controller function must be switched on in the "Room temperature control" parameter node.
Order No. 5142 00
Order No. 5145 00
Software "Push button sensor 3 plus"
Functional description
Page 97 of 281