Table of Contents
Advertisement
2.2 Device components
Figure 1: Device components of push-button sensor 3 basic
(1) Control surfaces
(1 x rocker switch with actuation point on left and right / colours depend on design)
(2) Status-LED red
(2 x per control surface / always controlled identically)
(3) Labelling field with backlighting (39 x 54 mm)
(4) Central web (colours depend on design)
Dimensions (1-gang & 3-gang):
Width (W): 55 mm / Height (H): 55 mm / Depth (D): 10 mm
Dimensions (2-gang):
Width (W): 55 mm / Height (H): 126 mm / Depth (D): 10 mm
i Specifications without flush-mounted bus coupling unit, without fastening brackets and
without design frame.
i Neutral inscription panels are included with the devices as part of the scope of supply. If
necessary, individual labels can be created using optionally available labelling sheets (see
Accessories) and labelling software, or on the Internet at marking.gira.com.
Order No. 5111 00
Order No. 5112 00
Order No. 5113 00
Installation, electrical connection and operation
Page 6 of 23
Advertisement
Table of Contents
