Call Key; Mic Sense Control - Kenwood TK-3180 Function Reference

1 BASIC FUNCTION
Configuration
You can directly select and transmit the
DTMF code by pressing the keypad of
the transceiver.
You can select the Autodial List
configured with KPG-89D.
DTMF (Autodial)
You can also select and transmit the
DTMF code when the Store & Send
function is enabled.
You can perform the same operation by
pressing the PF Autodial key.
You can directly transmit the DTMF code
DTMF (Keypad Auto
by pressing the keypad of the
PTT)
transceiver.
You can make a FleetSync Selcall by
pressing the keypad of the transceiver.
You can select the Selcall List
configured with KPG-89D and make a
SelCall.
FleetSync (Selcall)
You can enter and transmit the Selcall
ID code when the Manual Dialing
function is enabled.
You can perform the same operation by
pressing the PF Selcall key.
You can transmit the FleetSync Status
by pressing the keypad of the
transceiver.
You can select the Status List configured
with KPG-89D and transmit the status.
FleetSync (Status)
You can enter and transmit the Status
data number code when the Manual
Dialing function is enabled.
You can perform the same operation by
pressing the PF Status key.
You can transmit the FleetSync Selcall +
Status by pressing the keypad of the
transceiver.
You can select the Selcall List/Status
List configured with KPG-89D and make
FleetSync
a SelCall.
(Selcall + Status)
You can enter and transmit the Selcall/
Status code when the Manual Dialing
function is pressed.
You can perform the same operation by
pressing the PF Selcall + Status key.
Note:
" This function is only available for the TK-2180/ 3180.
" You can use this function when the TK-7180/ 8180 uses the
Microphone with 12/16 keys.
!
Configuration using KPG-89D
• Configuring the Keypad Operation (Refer to 6.8.2
General Tab - Keypad Operation.)
8
Operation
Function Reference

1.11 Call Key

This function allows you to transmit FleetSync, Status, 2-
tone, or DTMF code with a single operation.
You can directly transmit Status, 2-tone, and DTMF codes
configured with KPG-89D by pressing one of the PF Call
1 - Call 6 keys. The timing to transmit FleetSync, 2-tone,
and DTMF codes vary depending on the parameters of
FleetSync, 2-tone, and DTMF. The FleetSync code is
transmitted to the target Fleet/ID.
You can assign functions to the PF Call 1 to PF Call 6
keys using KPG-89D.
!
Configuration using KPG-89D
•
Configuring the Call key (Refer to 6.8.7 Call tab.)

1.12 Mic Sense Control

This function allows you to adjust the Mic Gain in
Emergency Mode and the input terminal, such as
External PTT.
You can switch the Mic Sense Control between Normal
and High level. There is a 4 dB gain difference between
the Normal level and High level.
You can configure the Mic Sense Control using KPG-89D.
Note: You can only configure External PTT (Voice) to the TK-7180/
8180.
!
Configuration using KPG-89D
•
Configuring the Mic Sense function (Refer to
6.7.1 Common-Page 1 tab - Mic Sense.)
• Configuring the Emergency Mic Sense function
(Refer to 6.14.12 Emergency Mic Sense.)
• Configuring the Mic Sense (External PTT (Voice))
(Refer to 6.15.3 AUX tab - Mic Sense.)
Version: 1.11