Group Id; Encode/ Decode Id; Gid Name; Transmit Power - Kenwood TK-3180 Function Reference

17.2 Group ID

You can configure the following functions to the LTR
Trunking System Group ID using KPG-89D.
•
Encode/Decode ID
•

GID Name

•

Transmit Power

•

Optional Signaling

•

PTT ID

•

Call Indicator

• Horn Alert (TK-7180/ 8180 only)
•
Scan Add
•
Transpond
•
Talk Around
•
Compander
•
Data
•
Scrambler
• Scrambler Code

17.2.1 Encode/ Decode ID

The Encode ID is the LTR ID used to transmit.
The Decode ID is the LTR ID used to open the squelch
and then allows a user to communicate.
The transceiver communicates within a Group using the
same LTR ID.
You can configure the Encode/ Decode ID using KPG-
89D.
!
Configuration using KPG-89D
• Configuring the Encode ID (Refer to FPRG 6.6.3
Encode ID.)
• Configuring the Decode ID (Refer to FPRG 6.6.4
Decode ID.)
17.2.2 GID Name
This function allows you to assign a name to a Group ID.
(Refer to 3.6.4 GID Name.)
You can configure the GID Name using KPG-89D.
!
Configuration using KPG-89D
•
Configuring a GID Name (Refer to FPRG 6.6.5
GID Name)
Version: 1.11
17.2.3 Transmit Power
Transmit Power is the transmission power of the
transceiver.
Press the PF Low Transmission Power key to alternate
the output (High/Low) of the transceiver when using the
TK-2180/ 3180.
A user cannot change the transmission power manually
for the TK-7180/ 8180.
You can configure the Transmit Power using KPG-89D.
!
Configuration using KPG-89D
•
Configuring the Transmit Power (Refer to FPRG
6.6.6 Transmit Power.)
•
Assigning functions to the PF keys (Refer to
FPRG 6.8 Key Assignment.)
17.2.4 Optional Signaling
You can install the option signaling board to make an
individual call.
You can configure the optional signaling parameters to
each channel using KPG-89D.
!
Configuration using KPG-89D
•
Configuring Optional Signaling (Trunking System)
(Refer to FPRG 6.6.7 Optional Signaling.)
17.2.5 PTT ID
This is the identification code transmitted when the PTT
switch is pressed and/or released.
You can configure the timing to transmit the PTT ID using
KPG-89D.
!
Configuration using KPG-89D
• Configuring the PTT ID (Refer to FPRG 6.6.8 PTT
ID.)
17.2.6 Call Indicator
The call indicator notifies a user that the transceiver has
received calls.
The user can use this function in noisy environments or
when he/she is away from the transceiver. The operation
of this function varies between the time when receiving
the Group ID and the time when receiving the Fix ID.
You can configure the Call Indicator using KPG-89D.
Function Reference
17 LTR TRUNKING
(Refer to 1.4 Transmit Output Power.)
(Refer to 18.2 Optional Signaling.)
(Refer to 14 PTT ID.)
61