Emergency Mode; Configuring Emergency Mode - Kenwood TK-3180 Function Reference

24 EMERGENCY MODE

The Emergency Mode can be activated by a user or a
man down switch in case of emergency. With this
function enabled, you can send a message to the
dispatcher in emergency situation.
The transceiver enters the Emergency Mode when the
PF Emergency key is pressed for more than Emergency
Key Delay Time. The Emergency Key Delay Time
prevents the transceiver from entering Emergency Mode
unintentionally.
The transceiver does not enter Emergency Mode in the
following conditions.
• The Stun function is enabled.
•
The transceiver is in the Transceiver Password Entry
Mode.
• The transceiver is in the Remote Mode.
•
The transmission CH/GID is not configured.
Off
Emergency Key
On
Emergency Key
Delay Time
Off
Emergency Mode
On
Emergency Mode
Off
On
RX
Duration of
Transmission
TX
Duration of Duration of
Locator Tone1 Locator Tone2
Figure 24-1 Emergency Mode
Note:
" The microphone sensitivity in Emergency Mode is configured
according to the Emergency Mic Sense configuration.
1.12 Mic Sense Control.)
" You can assign the PF Emergency key to the AUX/ PF key for
the TK-2180/ 3180. You can assign the key to the Triangle/ AUX
IN for the TK-7180/ 8180.
" The transceiver enters Emergency Mode first when the Triangle
key is assigned as the PF Emergency key and the Emergency
Key Delay Time is disabled.
" The Busy Channel Lockout function is disabled in Emergency
Mode.
" The transceiver does not decode the Stun Code and Optional
Signaling in Emergency Mode.
!
Transceiver Operation
# Entering to Emergency Mode.
1. Press the PF Emergency key for longer than
the Emergency Key Delay Time.
136
Duration of
Transmission
Receive
Duration
Duration of
Locator Tone1
(Refer to
Function Reference
# Exiting from Emergency Mode
1. Use one of the following methods to exit from
the Emergency Mode.
•
Press the PF Emergency key for longer
than the Emergency Key Delay Time
•
Turn the transceiver OFF.
!
Configuration using KPG-89D
•
Assigning functions to the AUX key and the PF
keys (Refer to FPRG 6.8 Key Assignment.)
24.1 Configuring Emergency
Mode
You can configure the following functions that are relevant
to Emergency Mode using KPG-89D.
•
Emergency CH/GID Type
•
Emergency Zone-CH/GID
•
Emergency Cycle
• Locator Tone 1 Duration
• Transmission Duration
•
Locator Tone 2 Duration
•
Receive Duration
• Emergency Display
• Emergency Text
•
Emergency Mode Type
•
Emergency Key Delay Time
• Emergency Mic Sense
•
Locator Tone
•
Emergency LED
•
Background Transmission
• Man Down Switch Type (TK-2180/ 3180 only)
• Man Down Delay Time (TK-2180/ 3180 only)
•
Man Down Pre-alert (TK-2180/ 3180 only)
•
Man Down Logic Type (TK-2180/ 3180 only)
• Emergency ID
•
Emergency DTMF ID
•
Emergency Call Fleet
•
Emergency Call ID
again .
Version: 1.11