Audio Control; Encode Data Type; Zone Add; Scan List - Kenwood TK-3180 Function Reference

17.1.10 Audio Control

This function allows you to configure the conditions to
disable the Mute function using the QT/DQT and Optional
Signaling. (Refer to 18.3 Signaling (Audio Control).)
You can configure the Audio Control function to each
Zone using KPG-89D.
!
Configuration using KPG-89D
•
Configuring the Audio Control (Refer to FPRG
6.5.10 Audio Control.)

17.1.11 Encode Data Type

This function allows you to reverse the logic of the LTR
Message to be sent.
You can configure the Encode Data Type using KPG-
89D.
!
Configuration using KPG-89D
• Configuring the Encode Data Type (Refer to
FPRG 6.5.11 Encode Data Type.)

17.1.12 Zone Add

You can configure the Zone to be added to the Scan List
using KPG-89D.
!
Configuration using KPG-89D
•
Configuring the Zone Add function (Refer to FPRG
6.5.12 Zone Add.)

17.1.13 Scan List

You can configure the Scan List according to the
configuration of the Scan List Table using KPG-89D.
!
Configuration using KPG-89D
• Configuring the Scan List (Refer to FPRG 6.5.13
Scan List and FPRG 6.5.25 Scan List Table
window.)
Version: 1.11

17.1.14 Auto Telephone Search

This function allows the transceiver to search for an
available repeater and automatically link to the repeater.
The System that meets the following conditions is
targeted for the search. When no System matches these
conditions, the Deny Tone sounds and the Auto
Telephone Search function does not operate.
•
The System in which Auto TEL Search is set to "Yes"
in the Zone Edit window
• The System with at least one repeater in which
Telephone Repeater is configured to "Yes" in the
Repeater Information window
Repeater.
• The System in which Telephone ID (Block Telephone
IDs) is configured in the Zone Edit window
Telephone (Block IDs) and there is at least 1 group in
the configured range.
You can configure the Zone to be added to the Auto
Telephone Search List using KPG-89D.
Note: The Zone, from which Auto Telephone Search starts, is
always searched, even when the Auto Telephone Search is
disabled.
!
Configuration using KPG-89D
•
Configuring the Auto Telephone Search function
(Refer to FPRG 6.5.15 Auto Telephone Search.)
•
Assigning functions to the PF keys (Refer to
FPRG 6.8 Key Assignment.)

17.1.15 TA Busy Channel Lockout

If a user transmits on a channel while other groups are
using that channel, the user may interfere with the
communications. This function prevents such
interference.
You can enable/disable the TA Busy Channel Lockout
function using KPG-89D.
!
Configuration using KPG-89D
• Configuring the TA Busy Channel Lockout function
(Refer to FPRG 6.5.16 TA Busy Channel Lockout.)

17.1.16 TA Key

This function allows you to enable/disable the PF Talk
Around key operation.
You can enable/disable the TA Key operation using KPG-
89D.
!
Configuration using KPG-89D
• Configuring the TA Key (Refer to FPRG 6.5.17 TA
Key.)
Function Reference
17 LTR TRUNKING
> Auto Telephone Search.
Telephone
>
(Refer to 13.2.1 TA Busy Channel Lockout.)
(Refer to 13.2.2 TA Key.)
>
59