Receive; Conventional Group; Trunking System - Kenwood TK-3180 Function Reference

2 BASIC OPERATION
# Changing the Direct CH/GID
1. Select the CH/GID to be used as the Direct CH/
GID.
TK-2180/ 3180
TK-7180/ 8180
2. Press and hold the one of the PF Direct CH/
GID 1 - 5 keys for more than 3 seconds.
The transceiver emits the Key Beep C and
configures the Direct CH/GID. In this case,
"DRn" appears on the Sub display.
TK-2180/ 3180
TK-7180/ 8180
!
Configuration using KPG-89D
•
Configuring the Direct CH/GID (Refer to 6.8.8
Direct CH/GID tab - CH/GID.)
•
Configuring the Direct Channel Operator
Selectable function (Refer to 6.8.8 Direct CH/GID
tab- Operator Selectable.)
•
Configuring the Return function (Refer to 6.8.8
Direct CH/GID tab - Return.)
• Assigning functions to the PF keys (Refer to 6.8
Key Assignment.)
16
2.9

Receive

2.9.1

Conventional Group

The transceiver emits the received tone only when the
received QT/DQT code matches with the configured QT/
DQT code. The transceiver emits the received tone when
the QT/DQT code matches.
You must configure the Receive Frequency and the QT/
DQT Decode using KPG-89D.
!
Transceiver Operation
1. Select the Zone-Channel.
the Zone, 2.5 Changing the CH/GID.)
2. Adjust the volume when receiving a call if needed.
(Refer to 2.2 Adjusting the Volume.)
!
Configuration using KPG-89D
• Configuring the Receive Frequency (Refer to
6.3.3 Receive Frequency.)
• Configuring the QT/DQT Decode (Refer to 6.3.5
QT/DQT Decode)
2.9.2

Trunking System

The transceiver emits the received tone only when the
received LTR ID matches with the configured LTR ID.
The transceiver emits the received tone when the LTR ID
matches.
You must configure the Receive Frequency and the
Decode ID using KPG-89D.
!
Transceiver Operation
1. Select the Zone-Group.
the Zone, 2.5 Changing the CH/GID.)
2. Adjust the volume when receiving a call if needed.
(Refer to 2.2 Adjusting the Volume.)
!
Configuration using KPG-89D
•
Configuring the Receive Frequency (Refer to
6.4.3 Receive Frequency.)
•
Configuring the Decode GID (Refer to 6.6.4
Decode ID.)
Function Reference
(Refer to 2.4 Changing
(Refer to 2.4 Changing
Version: 1.11