Kenwood TK-3180 Function Reference page 10

New Name
TX Inhibit while Receiving
Warning Tone
While Transmitting
Zone Name Text Length
Following are abbreviations used in this manual. Refer to
the abbreviation list.
Table 1-2 Abbreviation List
Abbreviation Full Spelling or its meaning
ACK Acknowledgement
ANI Board Automatic Numbering Identification Board
ANT Antenna
AQUA Kenwood's audio signal processing IC
AUX Auxiliary
BCL Busy Channel Lockout
BOT The beginning of transmission
CH Channel
COM port Communication port
COR Carrier Operated Relay
Dec ID Decode ID code
deg degree(s)
Del Delete
DQT Digital Quiet Talk code
DTC Data Transmission Control
DTMF Digital Tone Multi Frequency
Enc ID Encode ID code
EOT The end of transmission
EXT The end of Text
Ext. PTT an external PTT switch
FEC Forward Error Correction
GID Group ID code
GPS Global Positioning System
GTC Go to channel
Hi High
I/O Input/ Output
KDS-100 Kenwood Data Terminal
KGP-2A/2B GPS/ Modem Unit
LOK Link OK (connected to the repeater)
LTR ID ID used in the Logic Trunked Radio system
MI2 Microphone Input II
Mic Microphone
Mid Medium
MSK Minimum Shift Keying
OST Operator Selectable Tone
PA Public Address
II Confidential
Old Name
TX Inhibit on Receive
Warning Alert Tone
On TX
Zone Name Text length
FUNC/Ver. 1.00
Abbreviation Full Spelling or its meaning
PF Programmable Function
PSTN Public Switched Telephone Network
PTT ID PTT (Push-to-talk) ID code
QT Quiet Talk signaling
RSSI Received Signal Strength Indication
RTC Real Time Clock
RX Reception, Receiver
RXD Received exchange data
RXVCO Receiver's variable carrier oscillator
STX Start of Text
SW Switch
TA Talk Around
TEL Telephone
TOR Tone Operated Relay
TOT Time-out Timer
TX Transmission, Transmitter
TX LED Transmission LED
TXD Transmitted exchange data
TXS Transmission Sense
TXVCO Transmitter's cariable carrier oscillator
UTC Universal Time Coordinated
VGS-1 Voice Guide and Storage Unit
VOX Voice-operated Transmission
w/QT/DQT With QT signaling and DQT code
w/STE With Squelch Tail Eliminator