Direct Ch/Gid - Kenwood TK-3180 Function Reference

# Changing the Home Channel/Group ID
1. Select the CH/GID to be used as the Home CH/
GID.
TK-2180/ 3180
TK-7180/ 8180
2. Press and hold the PF Home CH/GID key for
more than 3 seconds.
The transceiver emits the Key Beep C and
configures the Home CH/GID. In this case,
"HC" appears on the Sub display.
TK-2180/ 3180
TK-7180/ 8180
!
Configuration using KPG-89D
•
Configuring the Home Channel (Refer to 6.2.3
Home Channel.)
•
Configuring the Home GID (Refer to 6.5.6 Home
GID.)
•
Configuring the Home Channel Operator
Selectable function (Refer to 6.2.4 Home CH
Operator Selectable.)
• Configuring the Home GID Operator Selectable
function (Refer to 6.5.7 Home GID Operator
Selectable.)
• Assigning functions to the PF keys (Refer to 6.8
Key Assignment.)
Version: 1.11
2.8

Direct CH/GID

This function allows you to jump to the registered CH/GID
with a press of a key. You can jump to the CH/GID in a
different Zone, instantly.
You can change the Home CH/GID using the PF key
when the Operator Selectable function is enabled with
KPG-89D.
You can configure the Direct CH/GID function using KPG-
89D.
Note: Refer to Scan Function for the operations performed when
pressing one of the PF Direct CH/GID 1 - 5 keys during
scan.
during Scan.)
!
Transceiver Operation
# Jumping to the Direct CH/GID
1. Press the PF Direct CH/GID key.
The "DRn" icon appears on the Sub display.
You can jump to the Direct CH/GID in other
than the current Zone. The corresponding
value is entered on "n"on the Sub display.
TK-2180/ 3180
TK-7180/ 8180
# Returning to the previous CH/GID
1. Press the PF Direct CH/GID key on the Direct
CH/GID.
The transceiver returns to the previous CH/GID
and "DRn" on the Sub display disappears.
TK-2180/ 3180
TK-7180/ 8180
Note: You can use this function when the Return function in the
Key Assignment window > Direct CH/GID is enabled.
Function Reference
2 BASIC OPERATION
(Refer to 23.1.4 Manually Changing the Zone-CH/GID
15