Pc Interface Protocol - Kenwood TK-3180 Function Reference

22 FLEETSYNC
!
Configuration using KPG-89D
•
Configuring Alert Tone (Emergency Response)
(Refer to FPRG 6.12.2 General 2 tab - Alert Tone
(Emergency Response).)

22.9.25 PC Interface Protocol

There are 2 types of PC Interface Protocol (Version 1,
Version 2).
The Version 1 is the same protocol that is used by the 80
and 150-series.
The Version 2 is a new protocol. In this version, a
Sequence is added to the command and the ACK
function, which is sent after receiving the command.
Therefore, it is easier to control the transceiver from a
PC.
You can configure PC Interface Protocol using KPG-89D.
!
Configuration using KPG-89D
• Configuring PC Interface Protocol (Refer to FPRG
6.12.1 General 1 tab - PC Interface Protocol.)
124 Function Reference Version: 1.11