Receiving The Short Message - Kenwood TK-3180 Function Reference

22 FLEETSYNC
# When the Short Message is properly sent to the
receiving party:
"COMPLETE" appears on the display.
TK-2180/ 3180
TK-7180/ 8180
# When the Short Message is not properly sent
to the receiving party:
"NO REPLY" appears on the display.
TK-2180/ 3180
TK-7180/ 8180
# When the Short Message is not sent properly
since the receiving party is Busy:
"BUSY" appears on the display.
TK-2180/ 3180
TK-7180/ 8180
108

22.4.2 Receiving the Short Message

This received Short Message data can be transferred in
the following way.
Table 22-12 Short Message Output
Short Message
LCD Display
Alert Tone
PC Command
!
Transceiver Operation
1. The "RECV DATA" appears on the main display
when the transceiver starts receiving data.
TK-2180/ 3180
TK-7180/ 8180
2. "COMPLETE" appears on the display when
receiving the Short Message. (Individual Call only)
TK-2180/ 3180
TK-7180/ 8180
Function Reference
Description
The received Short Message appears
on the LCD.
The Status Message appears if the
Message Display Type is "Fixed". The
Status Message and Selcall ID appears
alternatively every second if the
Message Display Type is "Alternate".
Alert Tone sounds when receiving the
Short Message.
The received Short Message is sent via
serial command. This message is sent
when the transceiver is connected to a
PC or the KDS-100 (MDT).
Version: 1.11