5 PASSWORD FUNCTION
Operation for activating
Clone Mode
Selector or [
]/ [
]
Enter the first digit.
The [C] key
Confirm the first digit entry.
Selector or [
]/ [
]
Enter the second digit.
The [C] key
Confirm the second digit entry.
Confirm the lowest digit entry.
The correct password is entered.
Figure 5-2 Configuring the Clone Operation using the Read
Authorization Password
32
5.3
This function prevents the operating frequencies from
being unintentionally.
You must enter the Overwrite Password from the PC
when writing the configuration data to the transceiver
using KPG-89D.
You can configure the Overwrite Password using KPG-
89D You can configure the Overwrite Password using
any numbers between 0 and 999999.
Note: You cannot clone data to another transceiver if the Overwrite
!
Configuration using KPG-89D
•
A wrong password
is entered.
Function Reference
Overwrite Password
Password is configured.
Configuring the Overwrite Password (Refer to
FPRG 6.7.1 Common-Page 1 tab - Overwrite
Password.)
Version: 1.11