Key Assignment Window - Kenwood TKR-750 Programming Reference Manual

6 EDIT MENU
6.5

Key Assignment Window

You can assign functions to each PF key on the "Key
Assignment" window.
Figure 6-12 Key Assignment window
Function Name
None The TKR-750/850/751/851 does not perform any operation.
AUX Out 1 On/Off It can enable/disable the function assigned to the Auxiliary output port by pressing one of the PF keys.
- You can assign this function when "Selectable" is configure to the Auxiliary Output 1 to Auxiliary Output 5
AUX Out 5 On/Off ports.
AUX I/O 1 On/Off It can enable/disable the function assigned to the Auxiliary I/O port by pressing one of the PF keys.
- You can assign the function when "Selectable" is configured to the Auxiliary I/O 1 to Auxiliary I/O 6 ports.
AUX I/O 6 On/Off (Refer to Table 6-7 Assigning Functions to the Auxiliary Output Ports.)
Channel 1 The TKR-750/850/751/851 moves to the channel from one of CH 1 to CH 16 channels.
- You cannot configure this function when "Channel Select" is configured to Auxiliary I/O ports 1 - 4. "E2"
Channel 16 appears on the display when specifying the channel without data.
The TKR-750/850/751/851 moves to the next lower channel.
Channel Down
The channel without data is skipped.
The TKR-750/850/751/851 moves to the next higher channel.
Channel Up
The channel without data is skipped.
The TKR-750/850/751/851 sends the CW ID.
CW ID On
This function is available on the channel having the CW ID.
CW Message 1
The TKR-750/850/751/851 sends one of CW Message 1 to CW Message 8.
-
Window.)
CW Message 8
DC Power Save On/Off It can enable/disable Power Saver Mode.
It can switch the panel LED On/Off.
Display On/Off
This function is enabled only when the TKR-750/850/751/851 is in Power Saver Mode.
It can disable/enable the Repeat Hold Time.
Hold Time Disable/
You can configure this function only when at least one channel is configured as the Repeat for Operation
Enable
mode and the Repeat Hold Time is enabled.
Local TX
It can disable/enable the transmissions by the Local Mic PTT.
Disable/Enable
It can switch High or Low for the transmission power.
Low Power On/Off This function activates only when at least one channel is configured as High for TX Power.
High Power.)
Monitor On/Off It can disable/enable the signalling Decode function.
Monitor Momentary The TKR-750/850/751/851 activates the Monitor function while pressing the PF key.
37
(Refer to Table 6-7 Assigning Functions to the Auxiliary Output Ports.)
Field Programming Reference (FPRG)
Select the function to assign to the PF key.
Refer to Table 6-3 Assigning functions to the PF
Range
Keys.
PF1 Key: None
PF2 Key: Repeat Disable/Enable
PF3 Key: TX Disable/Enable
Default
PF4 Key: Take Over On/Off
PF5 Key: Monitor On/Off
PF6 Key: Channel Up
Note: The PF key of the front panel displayed on the "Key
Assignment" window lights red when the PF key is selected.
When the Channel Up function is assigned to the PF1
key, the PF1 key is referred to as "PF [Channel Up] key".
Table 6-3 Assigning functions to the PF Keys
Description
(Refer to 6.10.1 AUX Select Tab.)
(Refer to 6.3 CW ID Window.)
(Refer to 6.4.3 Others Tab (Optional Features).)
(Refer to 6.4.1 Optional Features 1 Tab.)
(Refer to 6.12 CW Message
(Refer to 6.2.11 TX
Version: 1.01