Reserved Status Of The Status Message104 - Kenwood TK-3180 Function Reference

22 FLEETSYNC
# When no Status Message is configured in the
Status List:
The Status number appears.
TK-2180/ 3180
TK-7180/ 8180
4. The display returns to the last display.
The " " icon stays lit without blinking after
reading the Status Message.
Stack.)
TK-2180/ 3180
TK-7180/ 8180
22.3.3 Reserved Status of the Status
Message
There is the reserved status for the Status Message.
Below is a list of reserved status.
104
(Refer to 22.7
Function Reference
Table 22-8 Reserved Status List
Operation at
Status Function the receiving
Normal Status
10 - 79 User Status Reception
Operation
80 Default Status
81 - 87 Undefined
This status
Emergency
resets the
88 Reset
Emergency
Command
Status.
This status
Horn Alert
activates the
89 Activation
Horn Alert
Command
function. (*2)
The transceiver
transmits ACK
Remote Stun and inhibits the
Transmission transmission.
90
Inhibit In this case, the
Command Current Status
becomes "93"
(*3)
The transceiver
transmits ACK
Remote Stun and inhibits
Transmission/ transmission/
91 Reception reception. In
Inhibit this case, the
Command Current Status
becomes "94".
(*3)
The transceiver
transmits ACK
and disables
Remote Stun
the Stun
92 Reset
function. In this
Command
case, the
Current Status
becomes "80".
Remote Stun
Transmission
93 -
Inhibit
Response
Remote Stun
Transmission/
94 Reception -
Inhibit
Response
Reserved
Status for
Emergency
The transceiver
98: Man Down
transmits ACK.
95 - 99 Status
Alert/ Horn/
99: Emergency
None (*4)
Status other
than Man
Down
Enable/disable the
Status Input.
Manual PC
party
Dial Control
Yes
Yes
Yes/No
(*1)
Version: 1.11