Kenwood TK-3180 Function Reference page 11

About Trademark
IBM® is a trademark or a registered trademark of Interna-
tional Business Machines Corporation.
Microsoft Windows® 98, Windows® Me, Windows®
2000, Windows® XP and Windows logo are registered
trademarks of Microsoft Corporation.
LTR (Logic Trunked Radio) is a registered trademark of E.
F. Johnson company.
Other company names and product names are trade-
marks or registered trademarks of the companies.
Outline
!
About the TK-2180/ 3180
TK-2180/ 3180 is a VHF/UHF portable transceiver that
supports Conventional and LTR Trunking system.
!
About the TK-7180/ 8180
TK-7180/ 8180 is a VHF/UHF mobile transceiver that
supports Conventional and LTR Trunking system.
!
Features
• You can easily configure the data in each channel
using KPG-89D.
• You can configure each Zone as a Conventional
Group or a Trunking system.
• You can configure a maximum of 128 Zones to Con-
ventional/Trunking Groups.
• You can configure a maximum of 250 CH/GID for each
zone and a maximum of 512 CH/GID to each trans-
ceiver.
• The transceiver has the D-sub 25-pin connector on its
back. (TK-7180/ 8180 only)
• The transceiver is equipped with the VOX function.
(TK-2180/ 3180 only)
• The transceiver supports FleetSync II.
•
The transceiver has a entry level Scrambler function.
• The transceiver supports the following optional
boards.
- Voice Scrambler: SC20-460 (Transcrypt)
-
ANI Board: QE-2 (Cimarron)
- GPS Receiver: GPS35-HVS, GPS15L (Garmin)
(TK-7180/ 8180 only)
-
Voice Guide & Storage Unit: VGS-1
•
The transceiver can perform Dual Priority Scan using
two Priority Channels.
• The transceiver has the password function to protect
its configuration data.
Version: 1.11 Function Reference
• The transceiver displays battery status.
(TK-2180/ 3180 only)
• This transceiver has a time display function.
!
About the Programming Software
You can configure the transceiver's functions using
KPG-89D. You can write the configuration data to the
transceiver by connecting it to the PC using the KPG-
36/46 programming cable. In this manual, the
description of each function in the Function Reference
may have a corresponding reference in the Field Pro-
gramming Reference. Therefore, you can configure
the function by referring to the function also appearing
in the Field Programming Reference.
III