Kenwood TK-3180 Function Reference page 9

About this Manual
This manual describes the functions of the 180-Series
Mobile and Portable and how to configure the various
functions.
How to Read this Manual
This manual has the following sections. In each section,
each function has the reference data in order to find the
cross-referenced information. In this manual, the descrip-
tion of each function may have the corresponding refer-
!
ence in Configuration using KPG-89D.
Function Reference
(FUNC)
This section describes every function of the 180-Series
Mobile and Portable.
Field Programming Reference
(FPRG)
This section describes how to configure the transceiver
using KPG-89D.
Modification Information
(MOD)
This section describes how to modify the transceiver and
how to install various options.
About Notations
The following notations are used in this manual.
[ ]:
The characters in parentheses indicate the name of the
operating portion of the transceiver and the key of the PC.
" "
The characters in these marks indicate the name of the
functions, buttons, and menus displayed on the display of
KPG-89D.
We have updated many function names of functions.
Therefore, some functions names have been changed
even though the operations remain the same. Refer to
the comparison list for new/old function names.
Version: 1.11 Function Reference
Table 1-1 Comparison List for New/Old Function Names
New Name
2-tone
3 Reference Level
Adjustments
5 Reference Level
Adjustments
Autodial
Battery Saver
End of Transmit
Key Beep
Key-entry Error Tone
Low Transmit Power
Low Transmit Power
Manual Dialing
Off-hook
On-hook
Optional Board
Optional Signaling
OST Status Memory
Password Authorization Tone
Power-on Scan
Power-on Text
Power-on Tone
Pre-alert
Read Authorization Password
Receive Frequency
Ringer Tone
Scrambler Status Memory
Sidetone
Signal Strength Indicator
Single Reference Level
Adjustment
Store & Send
Stun-off Tone
Stun-on Tone
Time-out Timer
Tone Off
TOT
Transceiver
Transceiver Password
Transceiver-kill
Transmit Frequency
Transmit Power
Trunking Logic Board
Turn-off Code
I
Old Name
2 Tone
3 Point Adjustments
5 Point Adjustments
Auto Dial
Battery Save
End of TX
Key Press Tone
Key Input Error Tone
Low Power
RF Power Low
Manual Dial
Off Hook
On Hook
Option Board
Option Signalling
OST Back Up
Password agreement Tone
Power On Scan
Power On Text
Power On Tone
Pre-Alert
Read Password
RX Frequency
Ringing Tone
Scrambler Backup
Side Tone
Signal Meter
1 Point Adjustment
Store&Send
Stun Off Tone
Stun On Tone
Time Out Timer
Selectable No Tone
T.O.T.
Radio
Radio Password
Radio-kill
TX Frequency
TX Power
Trunking Board
Turn off Code