Cable List - Alcatel-Lucent 1675 LambdaUnite Installation And System Turn-Up Manual

System cabling and final assembly
Table 4-1
Cable Cable
number
1 Power input cable (+DC)
2 Power input cable (–DC)
3 Office grounding cable
4 PI cable
5
6 Station alarm cable
7 MDI/MDO cable
8 Straight LAN cable
(CAT5 with 4-wire RJ-45/RJ-45 connectors)
8A Crossed LAN (CIT) cable
(CAT5 with 4-wire RJ-45/RJ-45 connectors)
9 User byte cable
10 TI-DS1 output cable (100/110 Ω)
11 TI-DS1 input cable (100/110 Ω)
12 TI-E1 output cable (120 Ω)
TI-E1 input cable (120 Ω)
13
14 TI-E1 output cable (75 Ω)
15 TI-E1 input cable (75 Ω)
16 Subrack alarm cable
17 Electrical STM-1e output cable (75 Ω)
18 Electrical STM-1e input cable (75 Ω)
19 Fan power cable (PI/100 – Fan unit)
20 User Panel cable (CI-CTL – UPL)
(Standard: 848811584)
(Halogen free: 848929444)
...................................................................................................................................................................................................................................
365-374-179R10.0
Issue 2, June 2009

Cable list

Alcatel-Lucent - Proprietary
See notice on first page
Section
"Power wiring (External battery -
PDP)" (p. 4-7)
Procedure 4-2: "Ground wiring"
(p. 4-21)
Procedure 4-1: "Power wiring (PDP -
PI/100)" (p. 4-11)
"Station alarm wiring" (p. 4-35)
"Miscellaneous Discrete
Inputs/Outputs (MDIs/MDOs)"
(p. 4-53)
"LAN 10/100 Base-T interface"
(p. 4-72)
"User byte interfaces (G.703/V.11)"
(p. 4-58)
"TI-DS1 Station clock I/O interface
(100/110 Ω)" (p. 4-62)
"TI-E1 Station clock I/O interface
(120 Ω)" (p. 4-66)
"TI-E1 Station clock I/O interface (75
Ω)" (p. 4-69)
Procedure 4-3: "Subrack alarm wiring"
(p. 4-31)
"STM-1e interface" (p. 4-40)
"Power wiring (PI/100 - Fan unit)"
(p. 4-17)
already installed
Overview
4-3