Available Pi Cables - Alcatel-Lucent 1675 LambdaUnite Installation And System Turn-Up Manual

System cabling and final assembly
Procedure 4-1: Power wiring (PDP - PI/100)
...................................................................................................................................................................................................................................
Before you begin
The PI/100 units can only be used when the rack is provided with 25 mm
cables.
Cable data
Important! The cables are prefabricated and mounted within the rack frames. Each
cable (cable for side A and cable for side B) supports both subracks (upper and
lower).
The table below lists the available PI cables.
Table 4-2
Cable
Standard cable, PI – PDP,
A-Side
Standard cable, PI – PDP,
B-Side
Halogen-free cable, PI – PDP,
A-Side
Halogen-free cable, PI – PDP,
B-Side
Connection points
The following figure shows the connection points at the PDP.
...................................................................................................................................................................................................................................
365-374-179R10.0
Issue 2, June 2009

Available PI cables

Alcatel-Lucent - Proprietary
See notice on first page
Comcode
848850749
848850731
848929402
848929394
2
power
Length
3200 mm
[10.5 ft]
3200 mm
[10.5 ft]
3200 mm
[10.5 ft]
3200 mm
[10.5 ft]
4-11