Table of Contents
Advertisement
NE provisioning
...................................................................................................................................................................................................
Select the
5
...................................................................................................................................................................................................
By means of the equipment selection window, select the LAN port that will be used
6
for TCP/IP access ("LAN lan2" or "LAN lan3") and click
Result:
...................................................................................................................................................................................................
In the
7
of the LAN port.
...................................................................................................................................................................................................
Enter the IP address of the LAN port and click
8
...................................................................................................................................................................................................
In the
9
.
Mask
...................................................................................................................................................................................................
Enter the Subnet mask and click
10
...................................................................................................................................................................................................
11
IF ...
"LAN lan2" is used for TCP/IP,
"LAN lan3" is used for TCP/IP,
....................................................................................................................................................................................................................................
365-374-179R10.0
Issue 2, June 2009
tab and check that the
TARP
The
LAN Management
MCN/SCN IP Settings
MCN/SCN IP Settings
Alcatel-Lucent - Proprietary
Procedure 7-5: LAN port configuration for TCP/IP access
TARP Originator
tab appears on the right.
group box, click the
OK
group box, click the
OK
.
THEN ...
proceed to
Step
check the
Advanced Mode
group box and confirm the resulting message with
OK
.
NOTE: In addition to the
the
Advanced Mode
(ISIS Disabled)
,
(ISIS Disabled)
necessary to check the
will be selected in the next step.
only
See notice on first page
is enabled.
Select
.
button for the
Modify
.
button for the
Modify
12.
box in the
LAN Traffic
provides the options
IP and OSI (ISIS Enabled)
and
OSI only (ISIS Enabled)
Advanced Mode
IP Address
IP Subnet
LAN settings
option
IP only
,
IP and OSI
,
OSI only
. It is not
box if
IP
7-25
Advertisement
Chapters
Table of Contents
