...................................................................................................................................................................................................................................

Purpose

This appendix provides instructions for mounting a 1675 LambdaUnite MSS subrack

together with one or two 1663 ADMu subrack(s) within one ETSI-2 rack.

NOTE: It is highly recommended to use a rack extension (width) for this application

(see chapter 3, section

Mixed configuration kit

For establishing this application an orderable mixed configuration kit (CC848914271)

is needed which contains the following parts:

• 1 set of adapter brackets (CC848914222)

• 1 airguide (CC848920534)

• 1 anti-recirculation plate (CC848914180)

• 4 M6x16 hexagon screws (CC847079860)

• 2 M4x10 screws

• 1 label (CC847799533).

Contents

Procedure D-1: Mounting the 1663 ADMu PDP

Procedure D-2: Mounting the 1663 ADMu subrack(s)

Procedure D-3: Mounting a fan unit

Procedure D-4: Mounting the airguide

Procedure D-5: Mounting the 1675 LambdaUnite MSS subrack

Procedure D-6: Mounting the circuit breakers

Procedure D-7: Mounting the anti-recirculation plate

365-374-179R10.0

Issue 2, June 2009

Procedure 3-4: "Rack extension (width)" (p.

Alcatel-Lucent - Proprietary

See notice on first page

3-15)).

D-3

D-5

D-7

D-9

D-10

D-13

D-14

D-1

Table of Contents

Chapters

Table of Contents

Mixed Configuration: 1675 Lambdaunite Mss And 1663 Admu - Alcatel-Lucent 1675 LambdaUnite Installation And System Turn-Up Manual

Chapters

Related Manuals for Alcatel-Lucent 1675 LambdaUnite

Related Content for Alcatel-Lucent 1675 LambdaUnite

Table of Contents