Stm-1E Cabling With Rack Extension (Width) - Alcatel-Lucent 1675 LambdaUnite Installation And System Turn-Up Manual

System cabling and final assembly
If a rack extension (width) is available, the slack should be created within the rack
extension as shown in the figure below. Otherwise, the slack should be created within
the left/right rack frame or above the rack (e.g. within a rack extension (height), if
available).
Figure 4-25 STM-1e cabling with rack extension (width)
....................................................................................................................................................................................................................................
4-42
Alcatel-Lucent - Proprietary
See notice on first page
STM-1e interface
365-374-179R10.0
Issue 2, June 2009