Alcatel-Lucent 1675 LambdaUnite Installation And System Turn-Up Manual page 395

8 S tand-alone test procedures 8
Overview
...................................................................................................................................................................................................................................
Purpose
This chapter describes all the tests that should be carried out to check the functionality
of the NEs.
Assumptions
Make sure all assumptions listed below are fulfilled before carrying out any tests:
• All NEs are mounted and cabled correctly (see chapters 3 and 4).
• The people carrying out the tests are familiar with 1675 LambdaUnite MSS, the
SDH or SONET functionality, the WaveStar
test equipment.
Contents
Procedure 8-1: LED test
Procedure 8-2: Alarm reporting tests
Procedure 8-3: NE synchronization test
Procedure 8-4: Optical power meter test
Procedure 8-5: Receiver sensitivity test
Procedure 8-6: DS3 transmission and protection test
Procedure 8-7: Optical port transmission test (daisy chain test)
Procedure 8-8: XC and CTL protection test
...................................................................................................................................................................................................................................
365-374-179R10.0
Issue 2, June 2009
Alcatel-Lucent - Proprietary
See notice on first page
®
CIT software and the handling of the
8-2
8-3
8-8
8-11
8-16
8-24
8-32
8-38
8-1