Oplb/Par8 Parent Board With Om155 Sfp Modules - Alcatel-Lucent 1675 LambdaUnite Installation And System Turn-Up Manual

System cabling and final assembly
Figure 4-53 OPLB/PAR8 parent board with OM155 SFP modules
Up to eight SFPs fit in the parent board; they can be inserted or removed while the
system is carrying live traffic ("hot pluggable" or "hot swappable"). The number of
SFPs inserted on the parent board can be varied flexibly between 0 and 8. The
remaining SFP sockets can be left empty.
The 1675 LambdaUnite MSS SFPs are marked by the manufacturer, and they are
checked upon insertion, in order to protect against accidental insertion of non 1675
LambdaUnite MSS specific SFPs. Only for the 1675 LambdaUnite MSS specific SFPs
can Alcatel-Lucent guarantee the full functionality and warranty.
OPLB/PAR8 with OM622 SFP modules
The modules have a transmission rate of 622-Mbit/s. Up to eight SFPs fit on the parent
board. Further SFP information is given above.
OP622
The following figure shows the layout of the OP622 circuit pack (KFA17).
....................................................................................................................................................................................................................................
365-374-179R10.0
Issue 2, June 2009
Alcatel-Lucent - Proprietary
See notice on first page
Optical circuit packs
4-79