Technical Messages; Amplitude Troubleshooting - Integra CUSA Clarity Operator's Manual

Technical Messages

Amplitude Troubleshooting

CUSA Clarity Ultrasonic Surgical Aspirator System Operator's Manual
®
Condition
Console Failure
(Recoverable)
Console Failure
Condition
Fan Failure
Low Battery
Condition
Amplitude Indicator bar not
equal to selected amplitude,
or pulsing erratically
Cause
A fault has occurred
when restoring the
previously used
settings or service
information; default
values may be used.
A fault condition has
been detected within
the console.
Recommendation
Contact Integra Service
System is usable, but notify service
Recommendation
• On Tissue Select
4-Maximum, Amplitude Indicator is
always lower than selected
amplitude.
• During aggressive tissue
fragmentation, small amplitude drops
may briefly occur.
• If Amplitude Indicator is persistently
low or erratic:
• Stop vibration; allow handpiece to
cool.
• Return to Setup screen and repeat
handpiece test.
Amplitude Troubleshooting
Recommendation
System is usable, but
notify Integra Service
Restart console,
contact Integra
Service if problem
persists
3-High, or
®
13-3