Vision Engraving & Routing Systems Express User Manual page 83

Step by Step Operation 83
Select the Engrave icon from the left side toolbar, then select the color for cutting in the Filter Layer
drop down box in the Filter by Color window (select Red for this example). The screen will show only
objects in the color selected in the Filter by Color window.
Change the material setting by first clicking on the Tool Setup icon, then selecting Engravers
Plastic(Cutter/Beveler) from the drop down list, then click on OK.
Then select Engrave from the Cut Toolbox to send the cut job to the machine.
© 2015 Vision Engraving & Routing Systems